How to FIX Fake 32 GB Kingston Pendrive (Thumb Drive)

fIXING Fake 32 GB Kingston Pendrive (Thumb Drive)

Yesterday I purchased a 32 GB Kingston Pendrive Which I found out to be fake one.
It shows & formats (32 GB Full Capacity) in Windows Explorer (windows xp, Vista)
wihout any error. 

  In order to fix it & know its Actual Capacity I ran some programes.
Now the problem is : It only shows 8 MB and windows cannto format it.


I googled and found some tools but thet didnt work :

Tools Used : 
PDx8_2k_v327.exe (PortFree Production Program version 3.27. [Flash Disk test.zip]) - Which actual did bad i think.

MPTool-2007103-Fix-Usb-key :- Did not detect the pendrive
UdTools1.0.4.6_20081010 :-  Did not detect the pendrive

ChipGenius.exe :- Gave the following result :
      Device Name: +[J:]+USB Mass Storage Device(Generic Flash Disk 2.0 USB Device)

      PnP Device ID: VID = 2000 PID = 2008
      Serial Number: 6&&C7FC0C7&&0&&2
      Revision: 2.80

      Device Type: Standard USB device - USB2.0 High-Speed

      Chip Vendor: micov(???)
      Chip Part-Number: MXT6208

      Product Vendor: Generic
      Product Model: Flash Disk 2.0

      Tools on Web:  http://bbs.mydigit.cn/read.php?tid=16769


I also opned the USB Pendrive Plastic Case & found the following Chip Number (Controler Number I think) : - HUC2168
                    HISUN
                IPL04803.3
                08HT0724
   The number is different than the one shown by CHIPGENIUS.

Now How do I fix it :
1)  Either to its Original State 32 GB (showed & formated well)
2)  Or to its ACTUAL CAPACITY (Which is for shore >= 1 GB)

How to fix "fake" pendrives

1. Click here to download PortFree Production Program version 3.27.
2. Extract it and run it. You can use 7-zip, IZArc or the latest version of WinRAR to decompress 7-zip.
3. The interface is kinda **** but that's because it's translated (badly) from chinese or something. It should show a list of all USB flashdrives connected to your computer. Don't click on "Check Flash" or it will disconnect the pendrive, instead, click on "OPTION"
4. Clink on the "Flash Test" tab. Check only the box "Low Level Format" and set Mode to "All Blocks".
5. Click on the "Capacity Adjust" tab. Here you'll set the real size of your flash drive. Fake pendrives are usually 128 to 256 MB flash drives with that report a fake capacity that's way bigger. This fixes this. Try a higher capacity FIRST.
6. Click on the "Others" tab. Check "Removable"
7. Click "OK" and you'll be back at the main window. Click "RUN" and the process will begin.
8. Wait until it ends.

Now you'll have a pendrive that, despite being smaller than advertised, will work like a normal pendrive.